Skip to product information
1 of 1

Everest

Summitseal - Sealer Repair Fluid - Removes Surface Whiteness 200Litre

Regular price £1,319.50 GBP
Regular price Sale price £1,319.50 GBP
Sale Sold out
Tax included. Shipping calculated at checkout.
Size

PRODUCT DESCRIPTION
SummitSeal sealer repair fluid is as the name suggests a solvent-borne repair fluid that will easily correct issues if the xylene based imprinted concrete or block paving sealers have been applied in conditions when the surface is damp this can lead to problems. Surface whiteness is the most common issue and appears over time if the sealer has been applied when the surface is damp.
This product will remove xylene based sealers from the surfaces applied to.

This product should be used when problems like patchy whiteness have appeared on the surface of existing imprinted concrete or block paved driveways and patios. Surface whiteness, peeling or flaking sealer are common issues that are easily corrected using sealer repair fluid.


USES AND SURFACE COMPATIBILITY
Suitable for use on concrete ‡nd imprinted concrete.

SPECIAL PROPERTIES
It is easily cleaned and will withstand regular washing. Also resistant to most oils.

SPREADING RATE
First coat: Approximately 3 square meters per litre.
Second coat: Approximately 4 square meters per litre.
This is a rough estimate and varies depending on the condition of the driveway and the amount applied with each coat.


DRYING TIME
Under normal conditions, it is touch dry in approximately 3-4 hours.
Do not drive on the surface for 24 hours after the last coat.

STORAGE PRECAUTIONS
Store away from heat and naked flames. Secure lid between uses to prevent paint hardening. Store away from frost.

THINNERS
Thinners aren't required with this product, use xylene or proprietary brush clear for cleaning.

SURFACE PREPARATION
Ensure all surfaces to be sealed are clean, dry and free from oil and grease and there are a couple of days of good weather so there is no chance of rain during application.