Paintmaster - Block Paving Sealer - Polyurethane Resin Based - (Highly Durable) 2.5Litre
100% UVA and Fade resistant.
Excellent resistance to rain spotting and tyre plucks.
Resists oil stains and water damage.
Prevents moss spores.
Especially suitable where a high gloss finished is not required.
Early use on new, dry, block paving helps prevent efflorescence [white powdery staining].
Stops staining and sand joints in block paving.
Paintmaster Block paving sealer is an air-drying, solvent-borne, Polyurethane resin-based sealer which provides a durable sealer coat with a semi-gloss eggshell finish.
Suitable for use on concrete block paving, brickwork and concrete. Not suitable for clay pavers.
It is easily cleaned and will withstand regular washing. Also resistant to most oils.
SPREADING RATE AND COATS REQUIRED
We recommend applying 2 coats for the best results and optimum performance.
1st coat coverage, approximately 4 square metres per Litre, depending on surface porosity and texture.
2nd coat coverage, approximately 6 square metres per Litre, depending on surface porosity and texture
Under normal conditions, it is touch dry in approximately 3 - 4 hours.
Brush, Roller, or Airless Spray.
Make Sure Surface is 100% dry and free from any moisture or contaminants before application. Do not apply if there is any chance of rain.
Store away from heat and naked flames. Secure lid between uses to prevent paint hardening.
White Spirit or Turpentine Substitute can be used for thinning.
Ensure all surfaces to be sealed are clean, dry and free from oil and grease and there are a couple days of good weather so there is no chance of rain during application.