Everest Trade - Industrial Concrete Floor Paint - High Build Polyurethane Resin Based 20Litre Grey-Standard
BENEFITS AND KEY FEATURES
Industrial grade, polyurethane floor paint.
Long-lasting floor coating!
Manufactured for use in factories, warehouses and industrial units.
Long-lasting and highly durable.
Based on a high-quality, premium polyurethane resin.
Available in a wide range of colours.
Anti-slip textured gloss finish (With anti-slip option).
Gloss finish (Without anti-slip option).
High build formula.
Great resistance to vehicles.
Great for medium to high traffic areas.
Heavy-duty and long-lasting.
High durability and is easy to clean.
Everest Trade - Industrial Grade Concrete Floor Paint is a Premium single pack, hard-wearing, highly durable polyurethane resin-based floor paint, ideal for use in industrial areas such as warehouses, factories and industrial units due to its high build, high durability formula.
Available in an anti-slip variant which adds silica particles to provide a textured finish to improve grip and reduce the risk of slipping.
High durability against abrasion and impacts, provides better impact and abrasion resistance than the epoxy floor paints while also being much easier to apply.
It provides a tough petrol and oil resistant finish with excellent durability while also providing great tyre pluck properties good for areas with forklifts and work vehicles.
Ideal for use in large factories, industrial units, garages and on workshop floors.
MADE IN ENGLAND WITH PREMIUM RESINS.
This item is always in stock for all order sizes, fast delivery on any amount, important if you have a large area to cover.
Can be used on standard concrete, metal and wood as well as most other porous substrates. Powerfloated and polished concrete floors must be ground using a floor grinder prior to application of the primer/sealer linked in the application section. Not recommended for use on self-levelling floors as they tend to be non-porous.
We recommend bare concrete floors are primed with 1 coat "Everest Trade polyurethane floor primer and sealer" to ensure good penetration and adhesion.
Red, Blue, Black, White, Dark Grey, Grey, Light Grey, JCB Yellow, Magnolia and Green.
As well as any British standard or RAL colour for orders of 100 litres and over.
Click here for a colour chart.
SPREADING RATE (Coverage)
Approximately 5 - 7 square metres per litre, per coat. Coverage rates vary depending on surface area and porosity.
20 Litre tin = Approximately 60 M_ with 2 coats.
5 Litre tin = Approximately 15 M_ with 2 coats.
Under normal circumstances, it should be touch dry in 6-8 hours (at 15¡c) if well ventilated and conditions are dry.
Store away from heat and naked flames. Secure lid between uses to prevent paint hardening.
White Spirit or Turpentine Substitute can be used for thinning.
We recommend ordering all the paint required in one order so you receive the same batch, Ordering on different dates will result in receiving different batches which may result in a shade difference.
This is fine if you are planning on using the different batches on different coats, However, it's not recommended to use on the same coat.
*only if the anti-slip option is selected.