Everest Trade - High Build Polyurethane (Pu) Resin Based Garage Floor Paint 5Litre Green Anti-Slip
KEY FEATURES AND BENEFITS
High-quality polyurethane resin-based floor paint.
Ideal for use in home garages, commercial garages, showrooms and service centres.
Available in a wide range of colours.
Anti-Slip textured gloss finish (with anti-slip option).
Gloss finish (without anti-slip option).
High build formula.
Heavy-duty and long-lasting.
High durability and is easy to clean.
Everest Trade Paints - High Build Polyurethane Garage Floor Paint is as the name suggests a single pack hard-wearing, solvent-based floor paint based upon a premium polyurethane resin to ensure great durability and is perfect for use in domestic, and commercial car garages, as well as car showrooms, industrial units and factories. This paint also comes with the option of added silica particles for effective anti-slip properties.
High durability against abrasion and impacts.
Provides a coating with medium-high foot and vehicle traffic wear resistance.
MADE IN ENGLAND WITH PREMIUM RESINS.
Designed to protect, seal and colour concrete, wood and stone internal garage floors. It provides a tough petrol and oil resistant finish with excellent durability. Also ideal for use in garages and on workshop floors.
Can be used on standard concrete, metal and wood as well as most other porous substrates.
Power floated and polished floors must be ground using a floor grinder prior to application of this paint with the primer/sealer.
Not recommended for use on self-levelling floors as they tend to be non-porous.
Red, Blue, Black, White, Dark Grey, Grey, Light Grey, JCB Yellow and Green.
As well as any British standard or RAL colour for orders of 100 litres and over.
Click here for a colour chart.
SPREADING RATE (Coverage)
Approximately 5 - 7 square metres per litre, per coat. Coverage rates vary depending on surface area and porosity.
20 Litre tin = Approximately 60 M_ with 2 coats.
5 Litre tin = Approximately 15 M_ with 2 coats.
Under normal circumstances, it should be touch dry in 6 hours if well ventilated and conditions are dry.
Store away from heat and naked flames. Secure lid between uses to prevent paint hardening.
White Spirit or Turpentine Substitute can be used for thinning.
BATCH INFORMATION IMPORTANT!
We recommend ordering all the paint required in one order so you receive the same batch, Ordering on different dates will result in receiving different batches which may result in a shade difference.
This is fine if you are planning on using the different batches on different coats, However, it's not recommended to use on the same coat.