Everest Trade - Concrete Sealer - Polyurethane (Pu) Resin Based - External 200Litre
KEY FEATURES AND BENEFITS
Manufactured with a premium polyurethane resin, resulting in a more durable sealer than other solvent based sealers using acrylic resins
Gives concrete superb long term protection
Provides a tough and durable high-performance seal coating
Will not blister or peel, hardens & seals concrete permanently
Reduces efflorescence from concrete
Resists oil and stain penetration
Easy to apply with a roller or sprayer
Long lasting and made with premium polyurethane resins
The recommended products used to apply this product are in the description below and highlighted in Blue.
Everest Trade Paints Concrete Sealer is a solvent-borne, polyurethane resin-based sealer with exceptional effectiveness, This sealer will provide a heavy duty, long lasting clear seal coating with a satin / wet look finish.
Its penetration comes about by solvent evaporation, Penetrating into the concrete to protect the surface from oil and water infiltration while also dustproofing the surface.
100% UVA resistant, resistant to tyre plucks and provides high resistance to oil stains, foot and vehicle traffic and water damage.
Maintains performance life of the concrete. Yields significant whole life cost savings and reduces interim maintenance.
Made in England with Premium PU Resins.
More durable than other "solvent based" sealers that use an inferior acrylic resin.
Floor Cleaner: Oil Remover: Efflorescence Remover:
Everest Trade - Ultimate Driveway Cleaner for Driveways and Patios Everest Trade - Oil Stain Remover for Block Paving & Concrete Everest Trade Paints - Efflorescence and Salts Remover
USES AND SURFACE COMPATIBILITY
Suitable for use on exterior concrete floors and driveways.
It is easily cleaned and will withstand regular washing. Also resistant to most oils.
First coat: Approximately 4 square meters per litre.
Second coat: Approximately 6 square meters per litre.
This is a rough estimate and varies depending on the condition of the driveway and amount applied with each coat.
Under normal conditions, it is touch dry in approximately 4 hours.
Do not drive on the surface for 24 hours after the last coat.
Apply by brush, roller, conventional H.V.L.P or airless spray.
We have compatible application tools here.
We recommend you apply 2 coats of this sealer for the best performance and finish.
Store away from heat and naked flames. Secure lid between uses to prevent paint hardening. Store away from frost.
Thinners aren't required with this product, use white spirits or proprietary brush clear for cleaning.
Ensure all surfaces to be sealed are clean, 100% dry and free from oil and grease and there are a couple of days of good weather so there is no chance of rain during application.